HuanSheng PE400x600 Diesel Engine Mobile Jaw Crusher with Feeder and Conveyor

(10 Lượt)

Henan Huansheng Mechanical Equipment Co., Ltd.

Nhà sản xuất, chế tạo • 2 năm •

Giá

62,500,000 đ

Giá sỉ

0986xxxxxx

Giá số lượng lớn

0986xxxxxx

HuanSheng PE400x600 Diesel Engine Mobile Jaw Crusher with Feeder and Conveyor

Liên hệ nhà cung cấp Chat now

Những điểm chính về sản phẩm

Thuộc tính cụ thể của ngành

Các thuộc tính khác

Khu vực

Thương hiệu

Mã sản phẩm

Tên sản phẩm

HuanSheng PE400x600 Diesel Engine Mobile Jaw Crusher with Feeder and Conveyor

Nhà cung cấp

Henan Huansheng Mechanical Equipment Co., Ltd.

Thông tin nha cung cấp của bạn

Henan Huansheng Mechanical Equipment Co., Ltd.

2 yrs

Vị trí tại VN

Thời gian đáp ứng

≤2h

Tỷ lệ giao hàng đúng hẹn

95%

Sản phẩm Cửa hàng

Mô tả sản phẩm

HuanSheng PE400x600 Diesel Engine Mobile Jaw Crusher with Feeder and Conveyor

Product Description

Brief introduction

Jaw Crusher has two types, primary and secondary crushers.The compressive resistance of the crushed materials is up to the 320MPa. The large and medium-sized crushers are the key products in our company and stand in the front of the industry in the aspects of design and production.

1) Simple structure, convenient in use and maintenance. Stable performance, low operation cost, high crushing ratio. 2) Crushing cavity depth and no blind spot, increasing the feeding ability and capacity. 3) High crushing ratio, uniform product size. 4) Gasket type discharging mouth adjusting device, reliable, convenient and the adjusting range is big,

increase the flexibility of the equipment. 5) Lubrication system safe and reliable, easy to parts replacement, small maintenance workload. 6) Simple structure, reliable operation, low operating costs.

Operating principle

The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft, when the movable jaw down, the angle between the fixed jaw and movable jaw gets smaller, and the materials can be crushed to reach the crushing target, when the movable jaw rises, the angle between the fixed jaw and movable jaw becomes larger, the movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.

Specific Details

Product Parameters

Model: PE. **	Max feed size(mm)	Discharge opening range(mm)	Processing capacity (t/h)	Eccentic shaft speed(r/min)	Power (kw)	Weight (t)	Dimension (mm)
150*250	150*250	10-40	1-3	250	5.5	0.8	720660850
200*300	200*300	15-50	2-6	260	7.5	1.2	910750990
200*350	200*350	18-70	3-10	260	11	1.5	1000870990
250*400	250*400	20-60	5-20	300	15	2.8	130010901270
400*600	400-600	40-100	16-60	275	30	7	173017301630
500*750	500*750	50-100	40-110	275	55	12	198020801870
600*750	600*750	150-200	80-240	275	55	15.8	207020001920
600*900II	600*900II	65-160	50-180	250	55	17	219022062300
750*1060	750*1060	80-140	110-320	250	110	29	266024302800
800*1060	800*1060	130-190	130-330	250	110	29.8	271024302800
830*1060	830*1060	160-220	150-226	250	110	30.7	274024302800
870*1060	870*1060	200-260	190-336	250	110	31.5	281024302800
900*1060	900*1060	230-290	230-390	250	110	33	287024202940
900*1200	900*1200	95-165	240-450	200	110	52	338028703300
1000*1200	1000*1200	195-265	315-500	200	110	55	348028763300
1200*1500	1200*1500	150-350	400-800	180	160	100.9	420033003500
1500*1800	1500*1800	220-350	500-1000	180	280	122	516036604248
1800*2100	1800*2100	300-400	600-1200	180	400	150.6	621040134716

Application

Jaw crusher is mainly used for medium-size crushing of various ores and large materials, which can carry out coarse and medium crushing operations of various ores, rocks and other materials with compressive strength not greater than 320MPa. It is the preferred equipment for crushing ore and coal gangue crusher and other ore materials. It is widely used in mining, smelting, building materials, roads, railways, water conservancy and chemical industries.

* Operation Instruction

(A) The preparation of the jaw crusher before starting
1.Should carefully check whether the lubrication of the bearing is good, bearing elbow joint whether there is enough grease.
2.Should carefully check whether all fasteners are fully fastened.
3.Whether the protective device is good, found unsafe phenomenon, should be immediately eliminated.

(B) Starting of jaw crusher
1.After inspection and proof that the machine and transmission part are in normal condition, it can be started.
2.The machine can only be started without load.
3.After starting, if there is an abnormal situation, should immediately stop, to find out the cause of the hidden trouble, can start again.

(C) Maintenance and use of jaw crusher
1.The crusher can be fed after normal operation.
2.The material to be broken should be evenly added to the crushing chamber, and should avoid side feeding to prevent sudden load change or unilateral surge.
3.Under normal working conditions, the temperature rise of the bearing should not exceed 35 ° C, the maximum temperature should not exceed 70 ° C, otherwise it should be stopped immediately, identify the cause to be eliminated.

(D) Lubrication of jaw crusher
1.Often pay attention to timely lubrication of the friction surface, can ensure the normal operation of the machine and extend the service life.
2.The grease used in this machine should be determined according to the use of location, temperature and other conditions, generally can be used calcium, sodium or calcium sodium grease.
3.The grease added to the bearing seat is 50-70% of its volume, and must be replaced every three months; When changing the oil, clean gasoline or kerosene must be used to clean the dirt in the bearing and bearing seat.
4.Grease must be added before the contact between the elbow plate and the elbow pad is started.

Company Profile

Henan HuanSheng Mechanical Equipment CO.,LTD, is a specialized manufacturer and trade of crushers, mini dumpers, mucking loaders and so on , integrating development and production. We are holding this line for more than 10 years, with well-equipped testing facilities and strong technical force. Our products are exported to many countries all over the world. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in construction, woodworking and other industries. Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Warranty
(1)The Jaw Crusher quality assurance period for 12 months. In normal use circumstances, there is any quality problem during warranty period, we will use DHL, UPS, or other express delivery to send the accessories freely for customers after determine the damaged parts.

(2)We will try our best effort to solve, whenever customers have a problem.